Strength and reliability
Secure protection from bad weather and thieves
Rich variety of materials and colors
Window bars and shutters
Security bars are a combination of vertically and horizontally positioned steel profiles with a circular, square or rectangular cross-section that serve to protect your home or office from thieves or animals.
Window shutters are rectangular frames hung on hinges with a filling of horizontally of otherwise positioned profiles serving to guard or protect from sun and bad weather conditions.
Metal window bars
Security bars are made out of plain or stainless steel, with wrought iron elements or decorative profiles. An assembling by welding gives extreme strength to such a grid, while powder painting extends its life.
Bars of steel
The steel window bars are made of hollow or solid steel profiles type S235JR according to BDS (Bulgarian State Standard) EN 10219 with square, rectangular or round cross-section. The profiles could be located vertically, horizontally, diagonally or in combination. After a painting by Powder coating they are being assembled by a bolt, screw or anchor connection.
Bars of stainless steel
The stainless steel window bars are made of hollow or solid steel profiles type X 6 CrNi 18 10 with square, rectangular or round cross-section. The profiles could be located vertically, horizontally, diagonally or in combination. Assembling is being done by TIG welding and afterwards the lattice is being polished in the chosen by the customer mirror or satin effect. Mounting is done on a bolt, screw or anchor connection.
Security bars of wrought iron
Wrought iron bars are made of square, rectangular or round profiles, twisted, embossed and stamped iron and added ornaments and applications. The profiles could be located vertically, horizontally, diagonally or in combination. After powder coating painting, they are being installed by using bolts, screws or chemical anchors.
Window shutters can be made of steel or aluminium profiles in different colors and color patterns and shades. They are an ideal means to protect the building from thieves, sun, rain, snow, wind and create an additional barrier against loss of warmth through the windows and doors of the building.
Shutters of steel
The steel window shutters are made of hollow steel profiles S235JR and steel sheet metal with a wall thickness of 2 mm according to the EN 10219 standard. The assembly of the individual elements is accomplished by MIG / MAG welding and the fittings are especially chosen from AGB decorative elements which add extra reliability and beauty to the product. The shutters can be opened sideway or sliding on rails. They are electrostatically painted after their assembling, and it is recommended to galvanize them for achieving a longer life of the product. Mounting is done on a bolt, screw or anchor connection.
The aluminium window shutters are made of specialized system profiles of ALUMIL and ETEM with both movable and fixed lamellas. The assembling of profiles and accessories is by a fitting connection, and the framing is specified - with AGB decorative elements that add extra reliability and beauty to the finished product. The shutters can be opened sideward or sliding on rails. Before assembling, the profiles and accessories are subjected to electrostatic powder painting in all colors according to RAL catalogue or in wood-effect patterns. Mounting is done on a bolt, screw or anchor connection.
Design and dimensioning
Our qualified technician will take measures of the door opening as well as will advise the customer about the materials we offer, the opening systems, the locking methods as well as the color combinations. After this procedure a preliminary project will be created including the valuation of the desired product.
The designer submits a working blueprint to our workshop for manufacturing of the Staircases or ramp. The assembling depends on the material specified in the design project, such as steel bars and shutters are being welded, and in case of aluminium shutters – on fitting. Painting of the bars and shutters is being done by electrostatic application of powder polymeric anticorrosive and decorative coatings and following firing in thermoregulated furnaces.
The delivery of the manufactured product and the materials needed for installation to the site is being done by specialized transport vehicles for such purposes. To avoid scratches and injuries the elements of the construction are being packed with transport foil.
Our experienced installers have the most advanced professional equipment to achieve the required accuracy and ease of installation works. We work exclusively with high quality materials and do not compromise with the quality of the fixing, sealing, waterproofing adhesives and sealing compounds we use. In order to prevent unwanted damage on the walls and floors of the object caused by the welding, the connection of the elements is being done by means of a bolt or a screw connection. After completing of the installation, the site is being cleaned from waste materials, filings and packaging foil.